M-710iC/50
 (zoom) |
The innovative M-710iC series of robots is designed to handle medium payloads (20 to 70kg) with a slim wrist, rigid arm and small footprint, suitable for a wide range of application.
The M-710iC/50S is specially designed to enter into narrow machines and space. When carrying multi grippers, it can outperform smaller robots which were previously used in such applications.
M-710iC SERIES — THE INTELLIGENT AND TOP
PRODUCTIVE SOLUTION FOR:
Material handling
Machine load/unload
Parts transfer
Assembly
Cutting, grinding, deburring, polishing
Die casting with the IP67option
Dispensing
Palletizing
Maximum Payload :
50 kg
|
Maximum Reach :
2,050 mm
|
Repeatability :
± 0.07
|
Axes :
6
|
Motion Speed :
J1:175°/s
J2:175°/s
J3:175°/s
J4:250°/s
J5:250°/s
J6:355°/s
|
Motion Range :
J1:360°
J2:225°
J3:440°
J4:720°
J5:250°
J6:720°
|
Applications : Glueing and Sealing , Processing , Cutting , Assembly , Palletizing / Handling , Handling for Stamping and Forging , Handling for Die Casting , Handling for Plastic Moulding , Handling for Machine Tools , Others
|
FEATURES AND BENEFITS
BEST PAYLOAD AND INERTIA IN ITS CLASS
20kg, 50kg or 70 kg payload and large allowable axes inertias are ideal for handling large work pieces such as glass panes and steel panels
HIGHEST AXES SPEED
• Makes it the fastest robot in its class
• Allows handling larger or heavier work pieces
• Allows servicing larger and higher pallets
HIGH MECHANICAL RIGIDITY
Suitable for constant force applications (such as polishing, deburring...) and for process applications
(arc welding, spot welding, laser welding, other welding, glueing, parts handling, deflashing...)
|
STANDARD AIR AND ELECTRICAL CONNECTIONS PROVIDED TO AXIS J3
Integrated air and electrical services from J1 to J3
• Short connections to tool
• Increased wiring reliability
• Proven reliability (factory built)
FLOOR AND CEILING MOUNTING
(ANGLE AND WALL with restrictions)
• Easier access to the machine being serviced
• Maximised use of the robot work envelope
COMPACT WRIST: NO MOTORS AND IP 67
• No electrical elements at wrist: all motors for wrist motion are mounted on the robot‘s „shoulder“, J3.
· Reduced risk of damaging the wrist motors because of high heat or harsh environment
· Compact design to access narrow spaces
· High loads and high duty cycles possible thanks to good air cooling of the wrist motors
• Wrist unit sealed against dust and water according to IP67
FLIP OVER CAPABILITY
• Reduces cycle time
• Allows more flexible cell designs
• Allows several robots to work together
in close proximity
• Full working envelope when
robot mounted up side down |
HOLLOW JOINT CONSTRUCTION
Reduced wear of cable routing as most reducers have hollow construction
MOTORS DIRECTLY COUPLED TO THE REDUCER
• Simplified mechanical unit
• Reduced breakdown risk
• Compact and reliable solution
• High accuracy and minimum backlash
M-710iC/20L: VERY LONG J3 ARM
• Extended reach of 3110 mm to work
inside the car body (sealing applications)
• Compact and slim wrist that can easily
enter narrow spaces
• Ideal solution for arc welding of large work pieces
M-710iC/50S: ULTRA COMPACT MECHANICAL UNIT WITH HIGH PAYLOAD
• The M-710iC/50S has been designed to access narrow machines and workspaces.
• The J3 arm is able to avoid interference with low ceilings and openings while loading up to 50kg.
Full IP67 option for all units.
|
|
