TE95 - Microprocessor control unit for cable guns
WELDING CONTROL UNIT TE 95
TE 95 is a microprocessor welding control unit designed for cable resistance welders for car body shops. Differently from a standard control unit, TE 95 carries out two different working cycles for gun and multifunction gun; moreover, the multifunction gun working cycle is equipped with the sheets heating function. The TE 95 can be used for welders with both pneumatic and hand-operated gun.
MAIN FEATURES
- Synchronous thyristor drive with phase shift control for welding current adjustment.
- Simplified programming by means of four buttons.
- Adjustment of first phase shift delay to obtain the best balance of machine line current.
- Control of solenoid valve 24 Vdc 7,2 W Max with protected output against any short circuit.
- Separate working cycles for gun and multifunction gun.
GUN WORKING CYCLE
- Slope and pulse functions.
- Secondary current compensation function for welding of oxidised sheets and rods.
- Autoretain disabling for manually operated welders.
MULTIFUNCTION GUN WORKING CYCLE
- Welding time and welding current adjustment independent from gun adjustments.
- Sheets heating function.
PROGRAMMABLE PARAMETERS
| PARAMETER |
RANGE |
| Gun parameters: | |
| SQUEEZE | 01 - 50 cycles |
| SLOPE | 00 - 29 cycles |
| WELD TIME* | 01 - 65 cycles |
| CURRENT | 01 - 99 % |
| COLD TIME | 01 - 50 cycles |
| IMPULSE NUMBER | 00 - 09 |
| HOLD TIME | 01 - 50 cycles |
| COMPENSATION | 00 - 01 |
| WELD / NO WELD | 00 - 01 |
| Multifunction gun parameters: | |
| WELD TIME | 01 - 50 cycles |
| CURRENT | 01 - 99 % |
| HEATING | 00 - 01 |
Specifications subject to change without notice.